Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
News
Home > News
Brief analysis of the welding of spiral finned tube
2023 / 02 / 02
The welding of spiral finned tube is generally high-frequency welding. What knowledge does it contain? What can we learn from this knowledge? For those who want to understand the knowledge of finned tubes, it is also a problem to think about in the learning process. Next, let's have a good understanding, for reference only. 1. Welding principle High frequency current is used as the heat source to heat the contact surface and the area to be welded, and the upset force is applied on the outside of the fin tube to realize the solid phase welding of the contact surface. 2. Preparation before welding (1) There shall be no obvious pits on the surface of the pipe material. Sand blasting shall be carried out to remove oil, rust and other dirt. (2) The upsetting wheel shall be prepared to ensure that the clamping of the steel strip is moderately tight and uniform in the circumferential direction, and the internal parts can rotate flexibly. (3) The welding between electrode body and contact shall be firm and reliable, with smooth cooling and no leakage. 3. Welding parameters It mainly includes the tensile strength and welding rate of welded joints. The indicators of these parameters must meet the national standards, such as Q/SH.MM.25-2000.
Solution to insufficient heating capacity of finned tube heat exchanger
2023 / 02 / 02
Reasons for insufficient heating capacity of finned tube heat exchanger ① The pressure or temperature at the hot side of the pipe is too low, and the main symptom is that the temperature of the hot air at the cold side is close to the temperature at the hot side. ② The flow in the hot side of the pipe is too low, and the main symptom is that the temperature difference between the inlet and outlet of the hot side is large. ③ The flow distribution of several finned tube heat exchangers operating in parallel is uneven. The main symptom is that the inlet and outlet temperatures of each heat exchanger are inconsistent. ④ The heat transfer performance of finned tube radiator decreases with the service time. ⑤ The design effect was not achieved during the installation and commissioning of finned tube radiator, and the pipeline stroke was connected correctly, and the thermal insulation measures were ideal.
Anti-corrosion of finned tube heat exchanger
2023 / 01 / 14
During the use of Finned Tube heat exchangers, it is very important to prevent corrosion phenomena. In order to prevent this phenomenon from happening, some corrosion-resistant materials, such as some stainless steel and aluminum alloys, are used in the production process, and their corrosion resistance is relatively strong. Effectively improve the life of the heat exchanger. However, the cost of such materials is generally relatively high, so the purchase price is relatively high. Use some corrosion inhibitors, in corrosive media, add some small amount of substances to greatly reduce the corrosion performance of the metal, and then stop, it is also some corrosion inhibitors we use. Electrochemical protection is used to protect the cathode and anode, the protection of the cathode DC power supply and the protection of the anode on the metal surface. The power consumption used in this way is very large, and the cost of use is naturally high. It is protected by anode protection method of anode protection of the equipment external power supply. The basic function of the Finned Tube heat exchanger is to transfer heat and transfer part of the heat of the hot fluid to the cold fluid. Therefore, improving the use capacity of the heat exchanger is to improve its heat transfer performance, so as to realize the heat exchanger. transfer heat. Under the premise of comprehensive consideration of fluid resistance and no fluid-induced vibration, the flow rate should be as high as possible. For fluids without phase change, the heat transfer method should be as close as possible to countercurrent flow. The purpose of this is to increase the
Advantages of using finned tubes
2023 / 01 / 13
Advantages of using Finned Tubes Finned Tubes have several advantages: Improve heat transfer rate The fins in the Finned Tubes increase the contact surface area. This enables it to speed up the rate of heat transfer. Improve heat transfer coefficient In normal tubes, the outer surface area is about the same or slightly different than the inner surface area. In this case, the fluid with the lowest heat transfer coefficient will drive the overall heat transfer rate. Finned Tubes significantly increase surface area. This is particularly useful when the heat transfer coefficient of the fluid inside the Tube is greater than the heat transfer coefficient of the fluid outside the Tube. Finned Tube Products offers root welded Fin to tube attachments. This welding method is available on our large diameter tubes, providing a void-free fin-to-tube joint. This method of connection reduces the amount of solder used compared to the dipping process. This increases the heat transfer from the Finned Tubes. When immersed in solder, a complete insulating solder coating/film is formed over the entire Fin Tube surface. Welded Finned Tubes perform well up to 375°F.
2023 / 01 / 13
What is a Finned Tube? Finned Tubes are elongated flat tubes made of aluminum clad carbon steel and fitted with brazed aluminum fins. These tubes are used in series for heat exchangers. The advantage they offer over normal tubes is the greater contact of the fins with the external liquid. This speeds up the heat exchange between the liquid inside the tube and the liquid outside the tube. With normal tubes, the rate of heat transfer will be much slower. Finned Tubes come in different shapes. They are available in oval, round and flat tubes. what are they used for? Finned Tubes are especially useful in the context of air heat exchangers. In an air heat exchanger, heat transfer occurs between a liquid and a gas. Finned tubes can be very helpful due to the lower thermal coefficient on the air side. Finned Tubes increase surface area, which facilitates faster heat transfer between components. Finned Tube Heat Exchanger Example Finned tube heat exchangers are used in household appliances and industrial heat exchangers. Finned tube heat exchangers are used in air conditioners and car radiators. The purpose of using Finned Tubes in an air conditioner is to cool the air that passes through it. In a car radiator, it cools the liquid in the tubes through which air passes in cross-flow. Advantages of using Finned Tubes Finned Tubes ha
Why We Use U Bends for Heat Exchangers
2023 / 01 / 12
U-bend advantages: 1. The structure is compact and the volume is small, which saves the floor space and building height of the station building (the area is about 1/2 of that of a general shell-and-tube heat exchanger, and the height can be reduced by 30-40%). 2. Good heat transfer performance, low heat medium outlet temperature, high heat utilization rate, and good energy-saving effect. 3. The heat transfer coefficient is high, about twice the actual heat transfer coefficient of the plate steam-water heat exchanger, and the heat transfer area can be reduced by 40-60%. 4. Good hydraulic characteristics, small flow resistance of heat medium and hot water, good energy saving effect. 5. The pipeline system is simple and the heat dissipation loss is small. 6. Easy to maintain and clean. Please contact us for more details.
Laser welded finned tubes and finned tube heat exchangers
2022 / 12 / 29
Finned tubes are widely used in power and chemical industries. Many spiral heat transfer surfaces or threaded tubes can be considered as finned tubes. It has a significant effect on expanding the heat transfer area and promoting turbulence, and has a great influence on single countercurrent heat transfer and phase change convective heat transfer. The structure of the finned tube heat exchanger is basically the same as that of the general shell and tube heat exchanger. Only finned tubes are used instead of bare tubes as heat transfer surfaces. Finned tube heat exchangers are also commonly used to heat or cool the gas outside the tube and transfer steam or water inside the tube, such as air coolers, boiler economizers, radiators, etc. There are many kinds of materials for finned tubes, including stainless steel, carbon steel, titanium-copper alloy, etc., and the corrosion resistance is greatly improved. Laser welded spiral finned tube is a new type of wear-resistant and efficient heat exchange material in the finned tube welding industry. It is an energy-saving heat exchange element with high heat exchange efficiency, large cooling area, long service life and strong adaptability. Wide temperature range, high pressure resistance, in line with national energy conservation and environmental protection emission standards. Widely used in waste heat recovery, petrochemical, power plant boilers, economizers, passenger cars, industrial and civil building heating, refrigeration systems and other industries. Murphy Thermal Energy (Suzhou) Co., Ltd. has been focusing on the development and research of integrated laser-welded finned tubes and single-layer double-layer spiral coils. It is used in various fields such as power generation and
What are the waste heat recovery devices
2022 / 12 / 20
Waste heat recovery includes waste water waste heat recovery and exhaust gas waste heat recovery, and flue gas waste heat occupies a considerable proportion in waste gas waste heat recovery. Today, the editor will tell you what waste heat recovery devices are. 1. Flue gas waste heat recovery device Also known as flue gas heat exchanger, air preheater, etc., it is popularly explained as: recovering the heat in the flue gas for heating and preheating process production. Generally, waste heat recovery devices mainly include plate heat exchangers and tube heat exchangers. During years of production, installation, and transformation, we have concluded that for the waste heat recovery of flue gas, the plate structure is more conducive to the full utilization of waste heat of flue gas. Plate heat exchangers mainly include: high heat transfer efficiency, high waste heat recovery rate; small footprint; low cost; small footprint, etc. These are advantages over tubular heat exchangers. Heat exchanger manufacturers mainly use the heat energy that will and may be wasted in industrial production, and recycle it for reuse. In this regard, manufacturers are also constantly innovating and improving. The flue gas waste heat recovery device is based on the ordinary heat exchanger, combined with the current situation of energy shortage in the market and the consideration of environmental protection, how to recover and purify the waste water and waste gas, including the waste heat of the flue gas
What are the waste heat recovery devices
2022 / 12 / 20
Waste heat recovery includes waste water waste heat recovery and exhaust gas waste heat recovery, and flue gas waste heat occupies a considerable proportion in waste gas waste heat recovery. Today, the editor will tell you what waste heat recovery devices are. 1. Flue gas waste heat recovery device Also known as flue gas heat exchanger, air preheater, etc., it is popularly explained as: recovering the heat in the flue gas for heating and preheating process production. Generally, waste heat recovery devices mainly include plate heat exchangers and tube heat exchangers. During years of production, installation, and transformation, we have concluded that for the waste heat recovery of flue gas, the plate structure is more conducive to the full utilization of waste heat of flue gas. Plate heat exchangers mainly include: high heat transfer efficiency, high waste heat recovery rate; small footprint; low cost; small footprint, etc. These are advantages over tubular heat exchangers. Heat exchanger manufacturers mainly use the heat energy that will and may be wasted in industrial production, and recycle it for reuse. In this regard, manufacturers are also constantly innovating and improving. The flue gas waste heat recovery device is based on the ordinary heat exchanger, combined with the current situation of energy shortage in the market and the consideration of environmental protection, how to recover and purify the waste water and waste gas, including the waste heat of the flue gas
Working principle of laser welding finned tube
2022 / 12 / 07
Laser Welded Finned Tube Laser welded spiral finned tube is processed by laser welding machine. Stainless steel laser welded spiral finned tube In the traditional spiral finned tube, high-frequency welding, resistance welding and other technologies are used to attach stainless steel fins to the steel pipe. Laser welding of finned tubes has its insurmountable shortcomings. If there is a large difference in thermal conductivity between the two sides of the finned tube, fins should be installed and used on the side with the smaller thermal conductivity to achieve a stable balance. Therefore, it is necessary to place the side with a small thermal conductivity outside the tube as far as possible during production to facilitate later installation operations. If the thermal conductivity on both sides is not high, only side panels can be assembled on both sides to enhance heat conduction. However, if the structure is limited, fins can be omitted, as long as both sides are balanced. In another case, if the thermal conductivity on both sides of the tube is large, there is no need to use finned tubes. Of course, in order to further improve the heat conduction, threaded pipes or corrugated pipes can be used instead of light pipes, and the effect is also very prominent. Finned Tube is a kind of wear-resistant, new and high-efficiency heat transfer material, and it is a heat exchange element with high efficiency and energy saving during operation. This equipment is mainly used in high-frequency power as a heat source, and at the same time, it can re
Finned Tubes For Air Heat Exchangers
2022 / 12 / 06
The single-metal finned tube is integrally rolled from an aluminum tube, has no contact thermal resistance, high strength, heat and mechanical vibration resistance, good thermal expansion performance, and has a considerable extended heat transfer surface. The heat exchanger made of this finned tube is a heat exchanger with a wide range of uses. Bimetal composite finned tubes are made of copper and aluminum tubes (or steel tubes, aluminum tubes; or stainless steel tubes, aluminum tubes) after compounding and then rolling out fins. They have tight combination, small thermal resistance, good heat transfer performance and high strength. , small flow loss, strong anti-corrosion performance, not easy to deform under long-term cold and hot conditions, and long working life. The overall rolled Fin has no burrs, no wrinkles, easy to clean, easy to remove condensed water on the outer surface of the fin during wet cooling in heating and air conditioning projects, and is not easy to dust and scale in drying heating and other heat exchange occasions. Aluminum rolled Finned Tubes are rolled from aluminum Tubes as a whole, with no contact thermal resistance, high strength, thermal shock and mechanical shock resistance, good thermal expansion performance, and considerable extended heat transfer surface, made of this kind of finned tubes The effect of the heat exchanger is ahead of that of the serial or wound fin heat exchangers.
Manufacturers selling durable high-frequency welded finned tubes at an affordable price
2022 / 12 / 06
product description Finned tubes, also known as heat dissipation tubes, are divided into single metal finned tubes and bimetallic finned tubes. Single metal finned tube is rolled from aluminum tube as a whole, called aluminum rolled finned tube, has no contact thermal resistance, high strength, heat resistance and mechanical vibration, good thermal expansion performance, and has considerable extended heat transfer surface. The heat exchanger made of this kind of finned tube is more effective than the serial fin or winding fin heat exchanger, and it is a heat exchanger with a wide range of uses. Single metal finned tubes can also be made by direct rolling of steel tubes or copper tubes. Bimetallic composite finned tubes are divided into steel aluminum composite finned tubes and copper aluminum composite finned tubes. Steel-aluminum composite finned tubes are made of (steel tubes, aluminum tubes; or stainless steel tubes, aluminum tubes) and then rolled out of fins, copper-aluminum composite finned tubes are made of (copper tubes, aluminum tubes) and then rolled The fins produced have the advantages of tight combination, small thermal resistance, good heat transfer performance, high strength, small flow loss, strong corrosion resistance, not easy to deform under long-term cold and hot conditions, and long working life. The overall rolled fin has no burr, no wrinkle, easy to clean, easy to remove condensed water on the outer surface of the fin during wet cooling in heating and air conditioning engineering, and not easy to dust and scale in drying heating and other heat exchange occasions. The surface of the monometallic finned tubes and bimetallic composite finned tubes produced by our fa
Steel Finned Tubes For Boilers
2022 / 12 / 02
The Steel Finned Tube radiator for boiler is a new type of heat dissipation and heating equipment in recent years. Based on the traditional radiator, the processing technology is further upgraded. By adding finned tubes, the heat dissipation efficiency of the radiator is improved, and the heat dissipation effect of the radiator is improved. It has become a good substitute for the traditional radiator and a good choice for winter heating equipment in large areas. The steel finned tube radiator has high dustproof performance to prevent dust accumulation and is easy to clean. The surface of the fin tube radiator will be carefully polished during processing and manufacturing to ensure that the surface of the radiator is smooth and free of thorns, so the dust is not easy to accumulate, and the surface temperature of the radiator is high, so the dust is not easy to coke. When there is dust on the surface of the radiator, gently wipe it with a wet wiping cloth. The Finned Tube radiator uses steam and heat transfer oil as the heat transfer medium. Its heating temperature is higher, and the fluidity of steam and heat transfer oil is better, so its heating efficiency is higher. As the heat transfer medium, steam and heat transfer oil are often used in large workshops and greenhouses, with excellent heating effect. Steel finned tube radiators for boilers are mostly welded by steel pipes. Steel finned tube radiators have excellent heat dissipation performance, corrosion resistance and wear resistance, and the emergence of finned tube radiators has replaced traditional heating radiators. There are many kinds of processing techniques for steel finned tube radiators, such as soldered fin type, wound fin type, seria
Industrial Horizontal Finned Tubes
2022 / 12 / 02
The industrial horizontal finned tube workshop finned tube radiator is a new type of finned tube cooling equipment mainly used in the relatively harsh working conditions of the workshop, with high cooling efficiency and excellent cooling effect. Finned tube radiators are new radiators that have emerged in recent years and are mainly used in large-area buildings and indoor heating and drying operations. They are also a good substitute for traditional radiators. Industrial finned tube radiators usually choose steam and heat transfer oil heating systems. Industrial finned tube steam radiators use convection to radiate heat from bottom to top in every corner of the room. The heating efficiency of industrial finned tube steam radiators can reach several times or even dozens of times that of ordinary radiators, and is suitable for heating places with large areas. The heat conduction oil finned tube radiator is to inject the heat conduction oil from the inlet of the radiator, and the heat source device connected to the radiator will heat the heat conduction oil, from the refrigerant to the heat medium, and the heat medium will be in the pipe of the radiator Flow, transfer heat to the surface of the radiator, and the radiator will use the heat to increase the indoor temperature by means of convection heat dissipation. Industrial horizontal finned tube industrial finned tube radiator is a kind of finned tube radiator. It uses excellent seamless steel tubes to connect through spiral, extrusion, high-frequency welding and other processes. Finned tubes are installed on the poorer side to increase the heat transfer coefficient of the heat transfer side and improve the heating effect of the radiator. The base tubes of t
Finned tube radiator selection skills
2022 / 11 / 25
Finned tube radiator is a new type of heating equipment in recent years, and it is mostly used for heat dissipation in large-scale heating places. Finned tube radiators are divided into steel finned tube radiators, aluminum finned tube radiators, etc. according to different materials; Tube radiators and more. There are many models and types of finned tube radiators, how should we choose? First of all, we need to know what the use environment of our place of use is, whether it is high temperature and high pressure, strong corrosiveness, or dusty. After we determine the use environment, we need to know the area, height, and width of the use place Equal dimensions and what is the heating temperature we need to achieve. Secondly, after we understand our own specific needs, we can better choose the finned tube radiator. For example, in an environment with a lot of dust, we need to choose finned tubes with a larger pitch, generally about 10m, and in some places with less dust, we can choose finned tubes with a smaller pitch, generally is 8mm. When we choose finned tubes, we can also consult with specialized personnel to choose a reasonable radiator according to our own needs.
The concept and classification of finned tubes
2022 / 11 / 25
In order to better enhance the heat exchange efficiency, fins are usually used on the surface of the heat exchange tube to expand the total surface area (or inner surface area) of the heat exchange tube, thereby achieving the effect of enhancing heat exchange efficiency, so the heat exchange tube is called Finned tubes. Finned tubes can be divided into: spiral finned tubes, longitudinal finned tubes, zigzag finned tubes according to fin shape; finned tubes can be divided into single metal finned tubes, bimetallic composite finned tubes; Finned tubes can be divided into different processing techniques: welded finned tubes, extruded finned tubes, inlaid finned tubes, and wound finned tubes. The Finned Tube is a fin added to the surface of the heat exchange tube, and is a kind of heat exchange component. The heat exchanging components increase the fins, which also increases the surface area, thereby achieving better heat exchanging effect. In view of the fact that finned tubes are assembled on machinery and equipment similar to boilers, they must withstand the test of continuous high temperature, so when we select finned tubes, we must choose the following finned tubes with outstanding capabilities . 1. Finned tubes have strong wear resistance. If the finned tubes are worn, the heat transfer efficiency will be disturbed to a certain extent, so finned tubes with strong wear resistance should be selected. 2. Finned tubes have low contact thermal resistance. Only by selecting finned tubes with low contact thermal resistance can the performance of finned tubes be guaranteed under continuous high temperature conditions.
Laser welding finned tube process introduction
2022 / 11 / 25
The Laser Welded Spiral Finned Tube is a new type, wear-resistant and efficient heat exchange material in the finned tube welding industry. It is also a high-efficiency energy-saving heat exchange element, which has the characteristics of high heat exchange efficiency, large heat dissipation area, long service life, wide temperature range, high pressure resistance, and compliance with national energy conservation and environmental protection emission standards. Now it is widely used in petroleum refining, chemical industry, medicine, food, power plant, boiler, nuclear power, ship, military industry, drying and refrigeration and other industries. The range of materials for Finned tubes is very wide, including stainless steel, carbon steel, titanium, copper, alloys, etc., and the degree of corrosion resistance is greatly increased. Laser welded finned tube is a combination of spiral finned tube laser welding technology, hardware mold, and numerical control automatic control, which can realize welding between different metals (carbon steel, stainless steel, and any single metal combination welding), easy to operate, and easy to manufacture Flexible and convenient. Overcome a series of problems such as fracture, slow speed, poor forming, and wrinkling of finned tubes during the welding process. Now the company has successfully mastered everything in the welding of finned tubes such as spiral finned tubes and heat exchangers. Production and coordination of parameters and automatic fixtures.
Installation requirements and operating efficiency of stainless steel Finned Tubes
2022 / 11 / 24
Stainless steel finned tubes are commonly used in the space area with high temperature and certain smoke in the process of use. On the surface of the heat exchange tubes, related heat exchange tubes such as stainless steel finned tubes are effectively added, which can effectively transform the air in the tubes, which will achieve the specified purpose of use. Such finned tubes are widely used in my country. The frequency of use in boiler heating is relatively large.
Coal mine finned tube heat exchanger
2022 / 11 / 23
Finned tube heat exchangers for coal mines Industrial finned tube radiators have excellent heating performance, and can maintain a constant indoor temperature in large-area workshops and increase indoor vertical temperature. Industrial finned tube radiators usually use two heat transfer media, steam or heat transfer oil, and the heating temperature of these two media is higher than that of hot water. The service life of industrial finned tube radiators in workshops is generally 30 years. If people maintain them correctly and well during use, their service life can be extended to 50 years. Finned tube radiators have a long service life, are safe, reliable and excellent in use, and are the main reasons why many people choose it. Steel finned tube radiators for workshops are used in workshops, mainly using convection to circulate heat. Convection heat dissipation is a relatively good heat dissipation method among radiator series equipment. The steel finned tube radiator for the workshop has a large heat dissipation capacity. While meeting the heat demand of large-scale workshops, it can also extend the service life of the radiator with excellent pressure bearing performance and good anti-corrosion performance. Finned tube heat exchangers for coal mines The reliable heat dissipation of finned tube radiators is also related to the strict process standards in the production process. In fact, the production method of finned tubes is relatively simple, but the requirements to be met are higher. A radiator with a reasonable structure and a reliable process is the basis and prerequisite for its long-term and stable heating. The finned tube radiator in the workshop has good heat dissipation performance and excellen
Coal mine finned tube heat exchanger
2022 / 11 / 23
Finned tube heat exchangers for coal mines Industrial finned tube radiators have excellent heating performance, and can maintain a constant indoor temperature in large-area workshops and increase indoor vertical temperature. Industrial finned tube radiators usually use two heat transfer media, steam or heat transfer oil, and the heating temperature of these two media is higher than that of hot water. The service life of industrial finned tube radiators in workshops is generally 30 years. If people maintain them correctly and well during use, their service life can be extended to 50 years. Finned tube radiators have a long service life, are safe, reliable and excellent in use, and are the main reasons why many people choose it. Steel finned tube radiators for workshops are used in workshops, mainly using convection to circulate heat. Convection heat dissipation is a relatively good heat dissipation method among radiator series equipment. The steel finned tube radiator for the workshop has a large heat dissipation capacity. While meeting the heat demand of large-scale workshops, it can also extend the service life of the radiator with excellent pressure bearing performance and good anti-corrosion performance. Finned tube heat exchangers for coal mines The reliable heat dissipation of finned tube radiators is also related to the strict process standards in the production process. In fact, the production method of finned tubes is relatively simple, but the requirements to be met are higher. A radiator with a reasonable structure and a reliable process is the basis and prerequisite for its long-term and stable heating. The finned tube radiator in the workshop has good heat dissipation performance and excellen
High frequency welded finned tube heat exchanger
2022 / 11 / 16
High frequency welded finned tube heat exchanger is a kind of heating equipment commonly used in large industrial plants at present, which not only has good heat conduction, but also uses natural convection method to heat clean indoor and outdoor air more efficiently, so as to achieve the purpose of alternating cold current and heat. Finned radiator is also known as finned heat exchanger, finned tube radiator, etc. According to its specifications, it can be divided into high-frequency welded finned tube heat exchanger, coiled finned radiator, etc. The convection heat transfer of high-frequency welded finned tubes takes steam heating or hot boiled water as the heat transfer medium. The main reason why the high-frequency welded finned tube heat exchanger is more efficient than the general radiator to keep the indoor temperature rising is that most finned heat exchangers use the method of natural convection. The gas is directly heated according to natural convection, and the finned radiator is the main purpose of heating by heating the air immediately. High frequency welded finned tube heat exchanger can effectively avoid the adverse effects of ground covering. If the ground heating mode is used, covering furniture, wool blankets and other objects on the ground will lead to the release of heat energy. High frequency welded finned tube heat sink will heat the air from the bottom to the top, and the items on the ground cannot block the thermal energy distribution range, which is also an excellent way to release all the heat on the surface of the heat sink at home.
Application of Finned Tube Heat Exchanger
2022 / 11 / 16
Finned tube heat exchanger adopts the method of adding finned tube heat exchanger, which greatly improves the heat emission of radiator fins and further improves the role of heat emission of radiator fins. The finned tube heat exchanger is welded with low-carbon environment-friendly steel pipes, which is durable and emits heat for a long time. Our inspection and maintenance during use are still helpful to the service life of radiator fins. The finned tube heat exchanger adopts horizontal row, vertical row, including cross row, and adopts good heat supply in the room according to the way of convection heat transfer. Usually, the equipment can improve the temperature in the room within a few minutes after the start, to meet a good heating purpose and improve the living comfort of everyone in the room. Finned tube heat exchanger has a wide range of applications. At present, it has been used in heating systems including drying technology in power stations, manufacturing, planting and other industries. The steel seamless finned tube heat exchanger uses low-carbon and environment-friendly natural gas, liquefied petroleum gas, etc. as the heat source, giving play to the heating characteristics of energy conservation and emission reduction.
Laser welded finned tube is a relatively stable product
2022 / 11 / 14
Laser welded finned tube is a finned tube product with relatively mature and stable process, which has good advantages: 1. The thickness of base tube can be 0.8-1.mm, and the thickness of fin can be 0.3-1.mm, saving material cost. 2. High penetration rate can prevent gap corrosion, prolong service life and reduce heat transfer resistance. 3. Different materials can be used for processing. 4. It is easy for secondary processing, and can directly coil and bend pipes. 5. Small welding heat affected zone and small metallographic change make it possible to process small diameter finned tubes.
Problems in selection and acceptance of laser welded finned tubes
2022 / 11 / 14
The fan top finned tube is applied to the light radiator, which is made of copper sensitive alloy. Its elastic function is to provide a resultant force for the matching of the radiator and the module shell. This structure is simple in manufacturing and use, but the fin efficiency is low. Therefore, the fan top device is applied to the milliwatt level transistor. Finned tubes can be designed according to different shapes, such as uniform rectangular straight ribs, triangular straight ribs, trapezoidal straight ribs and concave parabolic straight ribs. No matter what type of laser welded finned tube is selected, its surface quality and internal quality shall be strictly checked. Generally speaking, the requirements for its surface quality include that the lath is well processed, the surface quality is uniform, and the coating layer is not allowed to fall off or not covered; The cladding layer shall be closely combined with the core alloy, and there shall be no gap or gap between them. Cracks after multiple bending are not allowed.
Send Inquiry
Mr. Mike
Tel:+86-0510-85189125
Fax:
Mobile Phone:+8618851577799
Email:mike@cnmcway.com
Address:406, Henghua Science park, No.20, No.58, Xiuxi Road, Binhu District, Wuxi, Jiangsu
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.