Laser Finned Tube is a new type of wear-resistant and efficient heat exchange equipment in the finned tube welding industry. It is a high-efficiency and energy-saving heat exchange element. Comply with the national emission standards for energy conservation and environmental protection. The laser finned tube introduces a fully automatic laser welding machine, 100% welding between the fin and the tube, no need to use filler material, no impurities on the welding seam, and the fin and the tube can be welded with a combination of different materials.
Laser finned tube is a new type of wear-resistant and high-efficiency heat exchange equipment in the finned tube welding industry. It is an efficient and energy-saving heat exchange element. Comply with the national energy-saving and environmental protection emission standards. The laser finned tube introduces a fully automatic laser welding machine, 100% welding between the fin and the tube, no need to use filler materials, no impurities in the weld, and different combinations of fins and tubes can be used for welding.
1. The base tube is the main laser-Welded Finned Tube fitting, the thickness can reach 0.8mm-1.5mm, and the thickness of the laser-welded finned tube can also reach 0.3mm-1mm. Compared with other products, not only in the laser-welded finned tube The manufacturing process of the Fin Tube has an advantage, and it also saves a lot in the cost of manufacturing materials; the whole welding penetration rate is very high, and the welding penetration effect of the laser welding fin tube can well prevent the crevice corrosion phenomenon and improve the laser welding fin The service life of the tube reduces the thermal resistance efficiency of heat transfer.
2. The choice of substrates is very diverse, and there are no restrictions on the processing of laser-welded finned tube materials. A variety of different raw materials can be selected to manufacture laser-welded finned tube processing; if it is secondary, you can directly process elbows or coils , the entire processing range is wider and will not be affected by the material.
3. It is little affected by the welding heat, because the Laser Welded Finned Tube has little metallographic change, so even the finned tube with a relatively small diameter can be processed, and the material selection requirements of the laser welded finned tube in the condenser tube The properties of good heat resistance transfer coefficient, corrosion resistance and wear resistance are also of high quality, in order to facilitate the manufacture and production of Laser Welded Finned Tubes.
Laser-welded fin tube
100% welding between fin and tube without use of filling material.There are no impurities on the weld for laser welding in a protective atmosphere.Different material of the fins and tubes.Simple bending and coiling of the fin tube.Since the heat-affected areas and welds are small, the material does not deform, while the tubes and fins have only slight microstructural changes.
Q: Why buy from us instead of from other suppliers?
A: professional experience in process manufacturing, timely delivery and long-term after-sales service. High quality products fully meet any specific requirements. We provide one-stop solution services and competitive prices.
Q: Are your products customized?
A: Yes, we can customize new products according to your requirements or drawings.
Q: what are your terms of payment?
A: T / T, PayPal
Q: how to ensure quality?
A: before mass production, the final inspection is always carried out before shipment;
Since the establishment of the company, it is our constant pursuit and commitment to meet our customers with science and technology and humanized services based on advanced science and technology as the starting point and the needs of customers.
Wuxi Mcway Equipment Technology Co., Ltd. is a high-tech enterprise integrating R & D, production and sales. The company develops and produces laser welded Finned Tubes and laser welded Finned Tube Heat Exchanger. The base pipe materials are carbon steel, Stainless steel, alloy steel, copper tube, titanium tube and nickel tube; The fin strip is made of carbon steel, stainless steel, alloy steel, copper and titanium; Our company also has the ability to produce high-frequency welded finned tubes, Extruded Finned Tubes, embedded G-type finned tubes, wound L / LL/ KL type finned tubes and Low Finned Tubes, and can be customized into cylindrical and disk shapes according to customer requirements.
The company has strong technical force, complete production equipment, advanced production technology, perfect detection means, reliable and Stable quality, and has passed the IS09001 international quality system certification. Guided by customer demand, the company can customize heat conversion products and heat energy schemes according to customer demand; The company continues to improve the quality of products, and is committed to serving petroleum, chemical industry, pharmacy, food, power plant, metallurgy, textile printing and dyeing, new energy, shipbuilding, military industry, boiler, HVAC refrigeration, waste heat recovery and other fields, so as to provide high-quality thermal energy solutions and services for the global thermal energy industry.
Contact Now
